The OMI-2H optical interface utilises a revised state-of-the-art modulated optical transmission
method, therefore offering the highest level of resistance to light interference.
OMI-2H has been specifically designed for use in twin probing applications, therefore it communicates
with both a spindle probe and an OTS table probe, or two spindle probes, and gives visual indication
of the activated device.
The OMI-2H has been designed with the bare minimum of I/O. The only output being probe status.
There is no user configuration present, specify and use with caution.
OMI-2H can be used with any combination of the following new generation probes. Flexible twin probe
system configurations, using one receiver and two probes, can provide an easily integrated solution for
most on-machine inspection applications.
Component setting/inspection : New! OMP40-2, OMP60, OMP400
Tool setting/inspection : New! OTS
|Principal application ||Small-to-medium machining centres using two modulated probes |
|Transmission type ||Infra-red optical |
|Transmission range || |
|Power supply || |
12 V to 30 V dc
|Cable || |
8 m standard lengths.
Screened, 6 core (each core 18 x 0.1 mm).
Mounting bracket allowing directional setting
|A-5439-0049 ||OMI-2H interface kit (8 m) |