New: A brand-new, unused, unopened, undamaged item in its original packaging.
Country of Manufacture: UNITED KINGDOM
Model: PH10T PHC10-3
MPN: A-1025-7526 A-1025-0100
Renishaw PH10T Motorized Probe Head and Renishaw PHC10-3 Probe Head Controller New with 1 Year Warranty. (The PHC10-3 has now replaced the PHC10-2)
Renishaw List Price $25756.00
The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.
All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matt black appearance.
The PH10T is similar to the PH10M, except that it features an M8 thread probe mount in place of the autojoint.
All M8 threaded probes, such as TP20 and TP200, and extension bars fit directly onto the head. The PH10T is fully compatible with all of Renishaw's stylus and module change systems.
|Probe mounting||M8 thread (2 wire)|
|Head mounting||Shank to suit CMM|
|Repeatability of position||0.4 µm (0.00002 in) specified at a distance of 48 mm (equivalent to a TP2 and PS1R stylus)|
|Total no. of positions||720|
|Max recommended drive torque||0.45 Nm|
|Maximum extension bar||300 mm (11.8 in) using PEL4 extension|
PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:
The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface.
|Data transmission||RS232 or USB|
|less than 1 A|
|PSU electrical ratings||Supply voltage: 100-240 V ± 10%
Frequency range: 50/60 Hz
Power consumption: 49 W max.
Transient voltages: Installation category II
|Input connectors||15 way 'D'|
|Power supply||24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor|
|Probe output connectors||7-pin DIN or 9-way 'D' type|
Maximum cable length
|Hand held control unit||HCU1 only|
PH10M or PH10MQ can be shipped for the same price. RS 232 and USB communication for PHC10-3 controller.
If your application requires custom cables please contact us. We also offer partial refunds for probing that you have replaced with this system.
All components in this sale are new and in unopened boxes with 1 Year Warranty.
If you were to purchase these items at full retail price you would pay $25756.00
This is by far the best price you will find on a Renishaw PH10T Motorized Probe Head and PHC10-3 Probe Head Controller New with 1 Year Warranty.
Why pay retail prices when you can purchase new with 1 Year Warranty from Metrology Parts.
Purchase with Paypal from Metrology Parts a Paypal verified retailer.
If what you order is not what you receive you will be refunded the full purchase price for this sale.
Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw product needs.
If you have any questions feel free to contact us. With 36 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support.