Renishaw SCR600 CMM Stylus Module Changing Rack Fully Tested With 90 Day Warranty A-2098-0255

MSRP: $5,877.00
(You save $3,427.00)
(No reviews yet) Write a Review
3.00 LBS
Calculated at Checkout

Product Description


Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.



Country of Manufacture:   UNITED KINGDOM



MPN:   A-2098-0255



Item Description

Renishaw SCR600 Stylus Module Changing Fully Tested with 90 Day Warranty.

Rack for SP600 Analog Scanning probes

The SCR600 holds up to four SP600 stylus modules for automatic changing and protects them from airborne contaminants. The SCR600 is easily mounted onto any CMM. Setting the SCR600 rack alignment and probe module changing co-ordinates requires minimal effort. SCR600 does not require any electrical connection for operation. It is protected from overtravel (in the probe entry direction) by a mechanism in the base which can be manually reset. The SCR600 houses up to four SP600 stylus modules per rack and any number of racks can be used in a system.


Height 225 mm (8.86 in)
Width 235 mm (9.25 in) 

About SP600

There are three, highly versatile, SP600 scanning probe systems.  Each system includes the probe itself, a PC interface card and a stylus module changing rack.

  SP600 SP600M SP600Q
  SP600 SP600M probe SP600Q
Length 89 mm 107.5 mm 98 mm
Weight 172 g 216 g 299 g
Mounting Adaptors to suit clutch, shank adaptor or CMM shank Renishaw autojoint: PH10M, PH10MQ or PH6M Direct in-quill mount to CMM

Features and Benefits

High speed scanning up to 300 mm/s, fast point measurement and high frequency response.

Low probing forces give maximum application flexibility.

Extremely robust design will withstand moderate collisions.

Low cost of ownership with an excellent product life, exceeding 50,000 hours in operation.

Low mass, high structural stiffness and friction free viscous damping give excellent dynamic performance characteristics. 

No electrical connections required

Overtravel protection in the probe entry direction by a mechanism in the base which can be manually reset

Holds up to four SH600 stylus holders per rack

Any number of racks can be used in a system

SP600 Specification

Suitable interface AC1 or AC2 analogue converter PC card (optional)
Probe attributes 3-axis measurement (X, Y, Z) linear and parallel motion in all axes
Measurement range ±1 mm (±0.04 in) (X, Y, Z)
Overtravel range X, Y and –Z protected by a kinematic joint
Resolution 0.1 µm (0.000004 in) with optional AC2 interface card 0.5 µm (0.00002 in) with optional AC1 interface card
Spring rate 1.2 N/mm nominal (X, Y and Z)
Damping 20% (X, Y, Z) typical at 23 °C
Operating temperature 10 °C (50 °F) to 40 °C (104 °F)
Power supply +12 V to -12 V, 5 V (±10%)
Outputs (X,Y,Z) Analogue proportional voltage output scaling: 4 V to 8.5 V/mm
Stylus range M4



This is a great price for a Renishaw SCR600 Stylus Module Changing Rack Fully Tested with 90 Day

Warranty. Purchase with confidence from a Paypal verified retailer with Warranty. If what you order is

not what you receive you will be refunded the full purchase price for this sale. Metrology Parts would

like the opportunity to earn your business for this sale and all of your future Renishaw product needs.

If you have any questions feel free to ask. With 36 plus years of experience with Renishaw products we

can help with all of your application needs as well as your after sales support.

Related Products