Renishaw CMM PH10MQ PLUS PHC10-3 Controller All New in Boxes 2 Year Warranty A-5863-3000 A-5863-0100

Product Description

Condition:   

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store.

Country of Manufacture:  UNITED KINGDOM

Brand:   RENISHAW

Model:   PH10MQ PH10M PH10T PHC10-3

MPN:   A-5863-3000 A-5863-0100

Item Description

All new in boxes with 2 Year Warranty Renishaw PH10MQ PLUS motorized probe head and Renishaw PHC10-3 PLUS Probe head controller. PH10T PLUS or PH10M PLUS can be shipped for the same price. RS 232 and USB communication for PHC10-3 PLUS controller. All items will be ordered from the factory for you which is why we have a 5 day handling time.If your application requires custom cables please contact us for a buy it now package price. We also offer partial refunds for probing that you have replaced with this system.All components in this sale are new and in unopened boxes with 2 year warranty. If you were to purchase these items at full retail price you would pay $26,027.00 

The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matt black appearance. 

PH10M PLUS

The PH10M can carry long extension bars and complex probes such as SP25M or TP7M. The highly repeatable autojoint allows rapid probe or extension bar changing without the need for re-qualification. 

 

                                                                                                                               

PH10M specification

Length	117 mm
Width	62 mm
Weight	645 g
Probe mounting	Autojoint (multiwire)
Head mounting	PH10M shank to suit CMM
Suitable controller	PHC10-3 PLUS
Repeatability of position	0.4 µm (0.00002 in) specified at a distance of 62  mm
Total no. of positions	720
Max recommended drive torque	0.45 Nm
Maximum extension bar	300 mm (11.8 in) using PAA3 extension

 

PH10MQ PLUS

The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself. This option provides a neater and shorter probe mount, with only the A axis protruding from the quill.                                                                                        

 

                                                                                              

PH10MQ specification

Length	73 mm
Width	80 mm
Weight	730 g
Probe mounting	Autojoint (multiwire)
Head mounting	Direct to quill
Suitable controller	PHC10-3 PLUS
Repeatability of position	0.4 µm (0.00002 in) specified at a distance of 62  mm
Total no. of positions	720
Max recommended drive torque	0.45 Nm
Maximum extension bar	300 mm (11.8 in) using PAA3 extension

 

PH10T PLUS

The PH10T is similar to the PH10M, except that it features an M8 thread probe mount in place of the autojoint.All M8 threaded probes, such as TP20 and TP200, and extension bars fit directly onto the head. The PH10T is fully compatible with all of Renishaw's stylus and module change systems. 

                                                                                                             

                                                                                                                               

 

PH10T specification 

Length	103 mm
Width	62 mm
Weight	645 g
Probe mounting	M8 thread (2 wire)
Head mounting	Shank to suit CMM
Suitable controller	PHC10-3 PLUS
Repeatability of position	0.4 µm (0.00002 in) specified at a distance of 48 mm (equivalent to a TP2 and PS1R stylus)
Total no. of positions	720
Max recommended drive torque	0.45 Nm
Maximum extension bar	300 mm (11.8 in) using PEL4 extension

PHC10-3 PLUS head controller

 PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:

• Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM.

• Checks and reports position

• Flags up errors, e.g. failure to reach position, obstruction before or after locking etc.The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface.                                                                                  

PHC10-3 PLUS specification

This is by far the best price you will find on a Renishaw PH10 PLUS motorized probe and PH10-3 PLUS probe head controller. Why pay retail prices when you can purchase new with 2 Year Warranty from Metrology Parts. Purchase with Paypal from Metrology Parts a Paypal verified retailer. If what you order is not what you receive you will be refunded the full purchase price for this sale. Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw product needs. If you have any questions feel free to contact us. With 34 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support.