Renishaw CMM PH10MQ and PHC10-3 Plus Controller New with 1 Year Warranty A-1036-0001 A-5684-0100 A-5683-0100

MSRP: $24,847.00
$12,075.00
(You save $12,772.00)
(No reviews yet) Write a Review
Condition:
New
Weight:
10.00 LBS
Shipping:
Calculated at Checkout

Product Description

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging.

 

Country of Manufacture:   UNITED KINGDOM

Brand:   RENISHAW

Model:   PH10MQ PHC10-3 PLUS

MPN:   A-1036-0001 A-5684-0100 A-5683-0100

 

Item Description

Renishaw PH10MQ Motorized Probe Head and Renishaw PHC10-3 Probe Head Controller New with 1 Year Warranty. (The PHC10-3 Plus has now replaced the PHC10-3 Legacy)

 renishaw-ph10mq-probe-head-image-.jpg

 

About PH10

The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.

All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matte black appearance. 

PH10MQ

The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself. This option provides a neater and shorter probe mount, with only the A axis protruding from the quill.

PH10MQ specification

Length 73 mm
Width 80 mm
Weight 730 g
Probe mounting Autojoint (multiwire)
Head mounting Direct to quill
Suitable controller PHC10-2
Repeatability of position 0.4 µm (0.00002 in) specified at a distance of 62  mm
Total no. of positions 720
Max recommended drive torque 0.45 Nm
Maximum extension bar 300 mm (11.8 in) using PAA3 extension
 
PHC10-3 Head Controller

 PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:

Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM.

Checks and reports position

Flags up errors, e.g. failure to reach position, obstruction before or after locking etc.

The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface.

 

renishaw-phc10-3-plus-controller-product-description-.jpeg  renishaw-phc10-3-plus-controller-switch-configuration-.jpeg 

PHC10-3 Specification

Length 180 mm
Width 440 mm
Height 44 mm
Weight 1.5 Kg
Data transmission RS232 or USB
Current Consumption
(at 240V)
less than 1 A
PSU electrical ratings
Supply voltage: 100-240 V ± 10%
Frequency range: 50/60 Hz
Power consumption: 49 W max.
Transient voltages: Installation category II
Input connectors 15 way 'D'
Power supply 24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor
Probe output connectors 7-pin DIN or 9-way 'D' type

Maximum cable length
RS232
USB


50 m
5 m (extendible in lengths of 5 m by use of a hub, to a maximum length of 30 m)

Hand held control unit HCU1 only

 

PH10T or PH10M can be shipped for the same price. 

RS 232 and USB communication for PHC10-3 Plus controller. 

If your application requires custom cables please contact us. We also offer partial refunds for probing

that you have replaced with this system.

All components in this sale are new with 1 Year Warranty. 

 

This is by far the best price you will find on a Renishaw PH10MQ Motorized Probe and PH10-3 Plus

Controller with 1 Year Warranty. Why pay retail prices when you can purchase new with warranty from

Metrology Parts. Purchase from Metrology Parts a Paypal verified retailer. If what you order is not what

you receive you will be refunded the full purchase price for this sale. Metrology Parts would like the

opportunity to earn your business for this sale and all of your future Renishaw product needs. If you

have any questions feel free to contact us. With 36 plus years of experience with Renishaw products we

can help with all of your application needs as well as your after sales support.  

Related Products