Renishaw CMM Improved Specification PH10M HCU1 PHC10-3 Controller with 6 Month Warranty A-1025-0050 A-1036-0001 A-1345-0220

MSRP: $25,756.00
(You save $17,756.00)
(No reviews yet) Write a Review
10.00 LBS
Calculated at Checkout

Product Description


Manufacturer refurbished: An item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product has been inspected, cleaned, and repaired to meet manufacturer specifications and is in excellent condition. 




Country of Manufacture:   UNITED KINGDOM


Model:   PH10M PHC10-3 HCU1 PAA1

MPN:   A-1025-0050 A-1036-0001 A-1345-0220



Item Description

Factory Rebuild Renishaw Improved Accuracy Specification PH10M Motorized Probe Head with PAA1, Renishaw PHC10-3 Probe Head Controller. (The PHC10-3 has now replaced the PHC10-2) and HCU1 all with 6 Month Warranty.

RS 232 and USB communication for PHC10-3 controller.

If your application requires custom cables please contact us. We also offer partial refunds for probing that you have replaced with this system.

If you were to purchase these items at full retail price you would pay $25756.00


The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.

All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matt black appearance. 



The PH10M can carry long extension bars and complex probes such as SP25M or TP7M. The highly repeatable autojoint allows rapid probe or extension bar changing without the need for re-qualification. 


                                                                                                 motorised head PH10M matt with SP25 scanning probe


PH10M specification

Length 117 mm
Width 62 mm
Weight 645 g
Probe mounting Autojoint (multiwire)
Head mounting PH10M shank to suit CMM
Suitable controller PHC10-2
Repeatability of position 0.4 µm (0.00002 in) specified at a distance of 62  mm
Total no. of positions 720
Max recommended drive torque 0.45 Nm
Maximum extension bar 300 mm (11.8 in) using PAA3 extension


PHC10-3 head controller

 PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:

  • Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM.
  • Checks and reports position
  • Flags up errors, e.g. failure to reach position, obstruction before or after locking etc.

The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface.


                                                                                    PHC10-3 controller



PHC10-3 specification

Length 180 mm
Width 440 mm
Height 44 mm
Weight 1.5 Kg
Data transmission RS232 or USB
Current Consumption
(at 240V)
less than 1 A
PSU electrical ratings
Supply voltage: 100-240 V ± 10%
Frequency range: 50/60 Hz
Power consumption: 49 W max.
Transient voltages: Installation category II
Input connectors 15 way 'D'
Power supply 24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor
Probe output connectors 7-pin DIN or 9-way 'D' type

Maximum cable length

50 m
5 m (extendible in lengths of 5 m by use of a hub, to a maximum length of 30 m)

Hand held control unit HCU1 only




This is by far the best price you will find on a Renishaw PH10M Motorized Probe, HCU1, PAA1 and PH10-3 Probe Head Controller.

Why pay retail prices when you can purchase with 6 Month Warranty from Metrology Parts.

Purchase with Paypal from Metrology Parts a Paypal verified retailer.

If what you order is not what you receive you will be refunded the full purchase price for this sale.

Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw product needs.

If you have any questions feel free to contact us. With 34 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support.  


Related Products