Renishaw CMM PH10M/PHC10-3/TP20 3 Modules All New with 1 Year Warranty A-1025-1520 A-1025-0050 A-1036-0001 A-5684-0100

MSRP: $30,230.00
$14,700.00
(You save $15,530.00)
(No reviews yet) Write a Review
Condition:
New
Weight:
10.00 LBS
Shipping:
Calculated at Checkout

Product Description

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging.
 
 

 

Country of Manufacture:   UNITED KINGDOM

Brand:   RENISHAW

Model:   PH10M PHC10-3 TP20

MPN:   A-1025-1520 A-1025-0050 A-1036-0001 A-5684-0100 A-1051-0417

 

 

Item Description

Renishaw PH10M Motorized Probe Head, Renishaw PHC10-3 Probe Head Controller (which has now replaced the PHC10-2) PAA1 Autojoint and TP20 Modular Touch Probe System with 3 Probe Modules New with 1 Year Warranty.

 renishaw-cmm-ph10m-phc10-3-tp20-3-modules-image-.jpg

 Renishaw List Price $30086.00

About PH10 Models

The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.

All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matt black appearance. 

PH10M

The PH10M can carry long extension bars and complex probes such as SP25M or TP7M. The highly repeatable autojoint allows rapid probe or extension bar changing without the need for re-qualification. 

PH10M specification

Length 117 mm
Width 62 mm
Weight 645 g
Probe mounting Autojoint (multiwire)
Head mounting PH10M shank to suit CMM
Suitable controller PHC10-2
Repeatability of position 0.4 µm (0.00002 in) specified at a distance of 62  mm
Total no. of positions 720
Max recommended drive torque 0.45 Nm
Maximum extension bar 300 mm (11.8 in) using PAA3 extension
 

PHC10-3 head controller

PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:

  • Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM.

  • Checks and reports position

  • Flags up errors, e.g. failure to reach position, obstruction before or after locking etc.

The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface.

PHC10-3 specification

Length

180 mm

Width

440 mm

Height

44 mm

Weight

1.5 Kg

Data transmission

RS232 or USB

Current Consumption
(at 240V)

less than 1 A

PSU electrical ratings

Supply voltage: 100-240 V ± 10%
Frequency range: 50/60 Hz
Power consumption: 49 W max.
Transient voltages: Installation category II

Input connectors

15 way 'D'

Power supply

24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor

Probe output connectors

7-pin DIN or 9-way 'D' type

Maximum cable length
RS232
USB


50 m
5 m (extendible in lengths of 5 m by use of a hub, to a maximum length of 30 m)

Hand held control unit

HCU1 only

 

About TP20

The TP20 is a compact 5-way, or 6-way, kinematic touch-trigger probe system. The two-piece design, comprising probe body and detachable stylus module(s), connected using a highly repeatable magnetic kinematic coupling. This provides the facility to change stylus configurations either manually or automatically without the need for requalification of the stylus tips, thereby giving significant time savings in inspection routines.

Modules offering a range of trigger forces allow the probe performance to be best matched to the measurement task. A set of probe extensions is also available, as is a 6-way module. The stylus mounting thread accepts styli from the Renishaw M2 range.

The TP20 system is easily retrofitted and is compatible with existing touch trigger probe interfaces, extensions and adaptors.

 renishaw-tp20-probe-module-specification-.jpeg renishaw-tp20-probe-module-option-list-.jpeg

PH10T or PH10MQ can be shipped for the same price. PHC10-3 supports both RS 232 and USB communication. 

Please specify which modules you would like for the TP20, Low force, Medium force,  Standard force, or Extended force in any combination. 

All components in this sale are new and in unopened boxes with 1 Year Warranty.

Please contact us should your application require custom cables for your installation. We also offer partial refunds for probing that you have replaced with this system.

 

This is by far the best price you will find on a Renishaw PH10M Motorized Probe PH10-3 Probe Head Controller and TP20 Touch Probe System with 3 TP20 Probe Modules of your choice.

Why pay retail prices when you can purchase new with 1 Year Warranty from Metrology Parts.

Purchase with with confidence from Metrology Parts a Paypal verified retailer. 

If what you order is not what you receive you will be refunded the full purchase price for this sale.

Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw product needs.

If you have any questions feel free to contact us. With 36 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support. 

  

Related Products